ad0761p6003b

ME-SFI cruise control with variable speed limiting - Testing electrical system

Type ad · emne 07.61 · version 0105 · 2019-12-12

Gælder for: Engine 113.940/942/943 up to 5/31/00, 113.961

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.61 Benzinindsprøjtnings- og tændingssystem ME

Gælder også for motorer/gearkasser: 113 940, 113 942, 113 943, 113 961

AD07.61-P-6003B

ME-SFI cruise control with variable speed limiting - Testing electrical system

25.11.2019

Engine

113.940/942/943 up to 5/31/00, 113.961

Danger

Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.

Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Connecting and using test equipment

AD00.00-P-1000AZ

Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge

AD07.61-P-2000B

ME-SFI fuel injection and ignition system (ME), DTC memory

Fault codes from P0000 to P0304

AD07.61-P-4000B

Fault codes from P0305 to P0743

AD07.61-P-4000BA

Fault codes from P0748 to P1747

AD07.61-P-4000BB

Cruise control push button Checking the electrical components of cruise control with an ME variable speed limiter

AD07.61-P-6003-01E

When removing the couplings at the ME-SFI [ME] control unit, first remove the center coupling; during attachment, the center coupling D is the last to be attached.

Note on measuring equipment/test connection column:

The numbers entered in brackets, e.g. in 1.0 (2A) mean:

A = coupling A in wiring diagram

2 = socket 2 in wiring diagram

Ignition OFF

Connect test wiring harness with socket box to ME-SFI [ME] control unit (N3/10) according to connection scheme. Plug with red identification is currently not yet required, as still no function available in ME-SFI [ME] control unit.

Check

1

ME-SFI [ME] cruise control with variable speed limiter electrics check cruise control switch

AD07.61-P-6003-01E

Henviste dokumenter