ad0761p600109a

Testing of electrical system for ME-SFI ignition system crankshaft position sensor

Type ad · emne 07.61 · version 0107 · 2003-06-10

Gælder for: ENGINE 112.910, 112.911 up to 31.5.00, 112.920, 112.921 up to 31.5.00, 112.923, 112.940 /941 /942 up to 31.5.00, 112.943 ENGINE 112.945 up to 30.11.00 in MODEL 463

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.61 Benzinindsprøjtnings- og tændingssystem ME — Serie 463

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.1 Grundinformation — Serie 463

Gælder også for motorer/gearkasser: 112 910, 112 911, 112 920, 112 921, 112 923, 112 940, 112 941, 112 942, 112 943, 112 945

AD07.61-P-6001-09A

Testing of electrical system for ME-SFI ignition system crankshaft position sensor

Scope of test

Tester/test connection

Operation/

Prerequisite:

Specified value

Possible cause/

Remedy

1.0

Crankshaft position sensor (L5)

Signal

Voltage

93

(37E)

93

(37E)

N3/10

N3/10

94

(38E)

94

(38E)

Test using oscilloscope

Starter: Actuate

Engine:idling

Only perform test with multimeter if oscilloscope is not available.

Starter: Actuate

Engine: idling

For signal refer to

AD07.61-P-2000-07B

> 2.0 V

> 5 V

Increasing rpm, increasing voltage

1.1

Teeth on drive plate

1.1

Resistance of L5

93

(37E)

N3/10

94

(38E)

Ignition: OFF:

Unplug coupling E from ME-SFI control module (N3/10).

(at 20 °C)

600 - 1200 Ω

Cable

L5

Henviste dokumenter