sm4920s0027a

Activate pump module of exhaust gas aftertreatment system (code: VS4PAKTIV)

Typ sm · téma 49.20 · verze 0100 · 2020-04-28

Platí pro: Model 470.### ## as of 000455 up to 037908 with engine 699.30 with code M4A (Engine OM699 120 kW) with code MA6 (Emissions category Euro 6b N1 GR.III/N2) Model 470.### ## as of 000455 up to 037908 with engine 699.30 with code M4B (Engine OM699 140 kW) with code MA6 (Emissions category Euro 6b N1 GR.III/N2)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 49 Výfukový systém, čistění výfukových plynů › 49.20 Dodatečná úprava výfukových plynů — Řada 470

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.51 Čerpadlo/dávkovací jednotka/tryska — Řada 470

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.40 Servisní opatření — Řada 470

Platí také pro motory/převodovky: 699 30*

SM49.20-S-0027A

Activate pump module of exhaust gas aftertreatment system (code: VS4PAKTIV)

24.04.2020

Model

470.### ## as of 000455 up to 037908 with engine 699.30

with code M4A (Engine OM699 120 kW)

with code MA6 (Emissions category Euro 6b N1 GR.III/N2)

Model

470.### ## as of 000455 up to 037908 with engine 699.30

with code M4B (Engine OM699 140 kW)

with code MA6 (Emissions category Euro 6b N1 GR.III/N2)

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02 4762

Operations: Connect/disconnect vehicle diagnosis system (XENTRY Diagnosis)

-

49 930 51

VS4PAKTIV

P

02 5058

Operations: Connect/disconnect starter battery charger (XENTRY Diagnosis connected)

-

49 930 51

VS4PAKTIV

P

02 1575

Operations: Activate pump module of exhaust gas aftertreatment system (diagnostic system connected)

-

49 930 51

VS4PAKTIV

Check

1

Check whether vehicle is affected by measure.

Affected vehicles: Activate pump module of exhaust gas aftertreatment system (code: VS4PAKTIV)

SM49.20-S-0027-01AAA

For authorized Mercedes­Benz service partners, only the entry in the Extended VEGA Application (EVA) system, in the "Current" tab, is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.

Activate pump module of exhaust gas aftertreatment system

2

Mount charger.

AR54.10-S-1127P


A sufficient power supply for the on-board electrical system battery must be guaranteed throughout the entire work procedure.
Otherwise any undervoltage that occurs may damage the control units.

Follow the operating instructions for the charger.

Use the charger to ensure that an adequate voltage (min. 12.5 V) is provided for the on-board electrical system battery.

3

Install vehicle diagnosis system.

If XENTRY Diagnosis is not yet attached.

AD00.00-S-2000-06P

Always use the latest XENTRY Diagnosis software release.
Use XENTRY Diagnosis software release December 2019 with all relevant current add-ons (in particular add-on 15334)
or XENTRY Diagnosis software release March 2020 with all relevant current add-ons (in particular add-on 15335)
or a more recent XENTRY Diagnosis software release.

The operation steps in XENTRY Diagnosis must be followed precisely at all times.

If XENTRY Diagnosis is already connected to vehicle,

continue with operation step 4.

4

Activate pump module of exhaust gas aftertreatment system.

AR54.21-S-0014P

To do this, select the following menu items:
Quick test view 
N141 (DCU470) - Selective Catalytic Reduction (SCR) 
Special procedures 
Activation of 'AdBlue®' system

It is essential to follow the operation steps in the diagnostic system.

5

Remove vehicle diagnosis system from vehicle.

6

Remove charger from vehicle.

AR54.10-S-1127P

Odkazované dokumenty