Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 00 16 | Kit 1 - Retrofitting 2-switches, 12 V and 24 V, left-hand steering | 1 |
Parts identified with an X below are included in this parts kit | ||
A 669 540 87 36 | X Waist rail wiring harness (left-hand steering) or | 1 |
A 669 540 88 36 | waist rail wiring harness (right-hand steering) | |
A 669 540 14 27 | X Frame wiring harness (all wheelbases, loop if necessary) | 1 |
A 005 545 10 14 | X Switch (10.5 bar) B75 | 1 |
A 005 545 11 14 | X Switch (12 bar) B74 | 1 |
A 004 545 04 05 | X Relay (12 V) or alternatively | 2 |
A 003 545 96 05 | X Relay (24 V) | 2 |
N 072 581 000 304 | X 10 A fuse | 1 |
A 006 545 44 26 | X Sockets | 2 |
A 000 990 44 68 | X Reducer | 1 |
A 000 429 02 27 | X Thrust ring | 3 |
A 000 987 04 46 | X O-ring | 3 |
N 007 603 012 111 | X Copper sealing ring | 3 |
L42.20-0009-01
1 Unscrew test connection P1 on bypass valve behind vessel V1
L42.20-0011-01
2 Unscrew compressed-air line 1 complete
V1 Vessel
2 Plug
L42.20-0010-01
3 Unscrew switch B14 at the front of the compressor and screw on removed test connection P1 there in its place
L42.20-0011-01
4 Unscrew the right-hand plug (2) on the vessel V1
L42.20-0012-01
5 Screw switch B74 into reducer
A 005 545 11 14 Switch B74
N 007 603 012 111 Copper sealing ring
A 000 990 44 68 Reducer
L42.20-0013-01
6 Screw reducer with switch B74 into right opening of the pressure vessel
A000 429 02 27Thrust ring
A 000 987 04 46 O-ring
7 Unscrew previous hysteresis switch (left opening on vessel V1) and reducer from T-piece on vessel V1
8 Rotate T-piece upwards through 90°
The side outlet must point inwards towards the center of the vehicle
L42.20-0014-01
9 Screw in switch B75 with reducer of the previous hysteresis switch
A 005 545 10 14 Switch B75
N 007 603 012 111 Copper sealing ring
10 Screw the rotated pipe 1 into the rear outlet of the T-piece
N 007 603 012 111 Copper sealing ring
L42.20-0015-01
11 Screw switch B14 into the end of the pipe