SI54.30-P-0004A | Service-Information: Coding Instrument cluster at installation | 9.8.00 |
MODEL 215.### ## up to 007966,
220.### ## up to 137474
with instrument cluster 2205402811/ 2911/ 3011/ 3111/ 3211/ 3411/ 3511/ 4611/ 4711
Modification notes
Installation of one of the above listed instrument clusters requires programming to be performed manually. | |||
1 | Read out coding of the old combination cluster and record it. | The following codings need to be read out and recorded: | |
Version coding: - Country coding - Special equipment - Instrument cluster specific coding - Main odometer reading - Coding display - Engine model | |||
ASSYST-settings: - Distance covered since last oil change - Days since last oil change - Country factor - Warning threshold indicated in km or miles as well as warning threshold in days | |||
| Instrument cluster (IC), operating information. | ||
2 | Removing and installing instrument cluster | ||
3 | Enter registered coding into new instrument cluster. | ||
4 | Additionally, perform manual programming. | For coding "Special equipment" mark the menu items: - DTR-Distronic/operating and display system (COMAND) - Tank version and confirm with F3. | |
5 | Perform extended coding. | Program extended coding of new instrument cluster in compliance with vehicle equipment. | |
6 | Perform instrument cluster specific coding. | "Set coding of engine torque interface for ASSYST to value "CAN-ID 310" codieren. |