General notes
We would like to inform you here about the different parameters for enabling regeneration of the diesel particulate filter.
The parameters can be viewed in "ACM control unit Adaptations Parameterization 05 Enable of regeneration", where they can be modified, if necessary, according to the equipment installed and requirements.
Parameter 05.01 "Minimum zone of diesel particulate filter for performing manual regeneration"
This parameter can be used to define the zone (volumetric efficiency or soot/ash content of the diesel particulate filter) above which manual stationary regeneration can be performed.
The higher the value is set, the higher the selected volumetric efficiency or soot/ash content of the diesel particulate filter above which manual regeneration can be performed.
Parameter 05.01 |
Value | Parameter info |
0 | Manual stationary regeneration can be performed preventively regardless of the volumetric efficiency. |
1 | |
2 | Manufacturer default setting |
3 |
Parameter 05.02 "Allow regeneration during operation with power take-off"
This parameter can be used to define whether automatic active regeneration should be allowed when the power take-off is active.
Parameter 05.02 |
Value | Parameter info |
Yes | Regeneration is allowed when the power take-off is active. |
No | Regeneration is not allowed when the power take-off is active. |