Service Information: Condensation sensor

Typ si · téma 42.00 · verze 0204 · 2007-01-23

Platí pro: MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

SI42.00-W-0003A

17.1.07

MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

When investigating condensation sensors it is found increasingly that the condensation sensors handed in are OK or that the electrical lines are cut.

For this reason we would like to point out that you should proceed as per the valid work instructions when working on the condensation sensor AR42.10-W-0050A.

The work instructions AR42.10-W-0050A are stored in the WIS and contain the removal/installation as well as testing the condensation sensor.

As it is no longer possible to investigate damaged condensation sensors, costs submitted for this are no longer recognized as part of warranty/goodwill.

The customer can be spared unnecessary idle times by observing the work instructions AR42.10-W-0050A.

Remove/install condensation sensor

AR42.10-W-0050A

Odkazované dokumenty

ar4210w0050a Demontovat, namontovat senzor kondenzační vody