SI40.20-P-0002A | Service Information for chassis alignment system | 13.12.99 |
MODEL 124, 126, 129, 140, 163, 168, 170, 201, 202, 203, 208, 210, 211, 215, 220, 230
with spoiler
Chassis alignment check with angle adapter on vehicles fitted with spoiler
Random-sample quality checks in our workshops have revealed that the angle adapters differ excessively from our specified tolerances.
Please use the quality report Q40.2/6.4 to check your angle adapters. If impermissible deviations exist, contact the equipment manufacturer or the equipment service provider for your chassis alignment system.
Check parallelism of angle adapters for chassis alignment at vehicle
The parallelism is assessed in pairs by means of the toe-in and camber measurements at rear left and right
Drive vehicle onto rotating and sliding plates.Attach sensors to quick-clamp holders.
1. Adapter pair
Without adapter
Difference amounts
With adapter
Camber
rear, left
Toe
rear, left
Camber
rear, right
Toe
rear, right
1. Adapter pair
Without adapter
Difference amounts
With adapter
Camber
rear, left
Toe
rear, left
Camber
rear, right
Toe
rear, right
Comments:
Signatures:
Q 40.2 7/ 6.4
Values :
The difference amounts must not be greater than 4'+1 digits. If they are greater, the adapter(s) must be repaired.