si1440w0005b

Service Information bulletin: Notes on exchanging the metering device (AdBlue)

Typ si · téma 14.40 · verze 0100 · 2006-12-22

Platí pro: MODEL 930, 932, 933, 934 with ENGINE 541.9## ## up to 484608 with CODE (MS4) BlueTec 4 MODEL 930, 932, 934 with ENGINE 542.9## ## up to 484608 with CODE (MS4) BlueTec 4 MODEL 930, 932, 933, 934 with ENGINE 541.9## ## up to 484608 with CODE (MS5) BlueTec 5 MODEL 930, 932, 934 with ENGINE 542.9## ## up to 484608 with CODE (MS5) BlueTec 5

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 14 Sběrné výfukové potrubí, motorová brzda, zařízení pro snížení obsahu škodlivin ve výfukových plynech › 14.40 Dodatečná úprava spalin, AdBlue — Řada 930 · Řada 932 · Řada 933 · Řada 934

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.51 Čerpadlo/dávkovací jednotka/tryska — Řada 930 · Řada 932 · Řada 933 · Řada 934

EinPAS 45 Data/informace › 45.20 Informace/opatření › 45.20.20 Servisní informace — Řada 930 · Řada 932 · Řada 933 · Řada 934

Platí také pro motory/převodovky: 541 9**, 542 9**

SI14.40-W-0005B

Service Information bulletin: Notes on exchanging the metering device (AdBlue)

15.12.06

MODEL 930, 932, 933, 934 with ENGINE 541.9## ## up to 484608 with CODE (MS4) BlueTec 4

MODEL 930, 932, 934 with ENGINE 542.9## ## up to 484608 with CODE (MS4) BlueTec 4

MODEL 930, 932, 933, 934 with ENGINE 541.9## ## up to 484608 with CODE (MS5) BlueTec 5

MODEL 930, 932, 934 with ENGINE 542.9## ## up to 484608 with CODE (MS5) BlueTec 5

Since October 2006 only the modified metering device with heating element is still installed in series production on these vehicles and the replacement part delivered via the GLC.

When replacing the metering device only the metering device with heating element may still be installed irrespective of which metering device was installed.

If in the case of repair a metering device without heating element is replaced by a metering device with heating element, the following work must also be carried out:

Installation of a new, enlarged heat shield.

Routing a wiring harness for power supply of heating element.

The software release in the engine control (MR) control unit must be changed from V05 to V07 as per the download.

The heating element must be parameterized with the help of STAR DIAGNOSIS.

For the installation of the modified metering device we have prepared the repair instructions anew or revised the existing repair instructions

Remove/install metering device for exhaust aftertreatment system

Revision

AR14.40-W-2002A

Install wiring harness for the metering device heating element.

New preparation

AR14.40-W-2036A

Change data record, software, parameters in engine control (MR) control unit

New preparation

AR07.15-W-3000A

Parts ordering notes

Part no.

Designation

Quantity

A 541 142 24 20

Heat shield

1

A 000 140 05 39

Metering device

1

A 541 150 24 20

Wiring harness

1

A 001 546 86 41

Terminal block

1

A 001 997 83 90

Cable tie

30

Odkazované dokumenty