1 | Exhaust gas recirculation line |
2 | Exhaust gas recirculation cooler |
3 | Lifting eye |
4 | Carrier |
A | Variant without elevation |
B | Variant with elevation |
W14.20-1096-06
Different exhaust gas recirculation lines
Exhaust gas recirculation line (1), variant A without elevation (A): A 471 140 55 08
Exhaust gas recirculation line (1), variant B with elevation (B): A 471 140 32 08
Different exhaust gas recirculation line variants are used.
The exhaust gas recirculation line (1) variant without elevation (A) does not have any elevations (arrows) on the rear side and therefore it cannot be installed without additional operations.
The exhaust gas recirculation line (1) variant with elevation (B) requires both elevations (arrows) to be ground off before installation.
The elevations (arrows) must be ground off until they are level with the exhaust gas recirculation line (1).
Otherwise, a collision with the carrier (4) of the lifting eye (3) will hamper installation and cause malfunctions in the exhaust gas recirculation line (1).