ra18001020415x

0415 - Replacement of the oil nozzle return lock Engine 102 (except 102.983/99), single-belt drive

Typ ra · téma 18.00 · verze 9451 · 1994-12-21

Platí pro:

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 18 Mazání motoru, chlazení motorového oleje › 18.00 Všeobecné

Platí také pro motory/převodovky: 102 910, 102 922, 102 924, 102 962, 102 963, 102 982, 102 985

18-415 Replacing oil nozzle return lock

Preceding work:

Cylinder head removed (01-415).

Operation No. of operation texts and operation values or standard texts and flat rates

0415 - Replacement of the oil nozzle return lock Engine 102 (except 102.983/99), single-belt drive

P18-5328-13

Oil nozzle return lock (A)

tap M6 thread about 5 mm deep

Oil nozzle return lock (A)

pull out with impact extractor 116 589 20 33 00 and threaded bolt 100 589 00 34 00

Cylinder head up to 07/1987:
new oil nozzle return lock (A)

grind off at stop collar to 8.9 mm

New oil nozzle return lock (A)

knock in as far as the stop collar (arrow) with suitable drift, size Y = 7 mm

0415 - Replacement of the oil nozzle return lock Engine 102 (except 102.983/99), single-belt drive
0415 - Replacement of the oil nozzle return lock Engine 102 (except 102.983/99), single-belt drive

Special tools

116 589 20 33 00

116 589 20 33 00

0415 - Replacement of the oil nozzle return lock Engine 102 (except 102.983/99), single-belt drive

P18-5328-13

Note:

Modified oil nozzle return lock

As of 07/1987 an oil nozzle return lock with stop collar has been installed in the cylinder head.

This prevents it "migrating upward".

Size Y = 7 mm

Odkazované dokumenty