ra07016010112x

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

Typ ra · téma 07.11 · verze 9605 · 1996-01-29

Platí pro:

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.11 Řadové čerpadlo a mechanická regulace systému vstřikování paliva vznětového motoru (M/RSF) — Řada 601 · Řada 602 (modely 91*)

Platí také pro motory/převodovky: 603 91*

07.1-112 Checking start of delivery with digital tester (RIV method)

Job no. of Job Texts and Work Units or Standard Texts

and Flat Rates 07-8244 and 8245

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

Unscrew screw plug (arrow) from governor
housing (2)

unscrew.
Tightening torque 30-35 Nm.

Testers (001, 017, 021)

connect, disconnect.

Run engine at idle speed

read RI value off digital tester at 15° ATDC.
RI set value: 15°1° ATDC.
Vehicles with code 62/0 14°+0.5° ATDC.


Adjust start of delivery if required
(07.1.116 and 117).

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)
0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)
0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)
0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

Special tools

Commercially available tools

Use without adapter

Digital testers

e. g. AVL, Diesel-Tester 873

e. g. Bosch, ETD 019.02

e. g. Sun, DIT 9100

Use with adapter

Digital tester

e. g. Bosch, MOT 103, 002.02, 250, 301

Hermann D960, D980

Bear DEACE

Sun MEA 1500

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

Connection diagram for existing testers with adapter

017

RI sensor

021

TDC pulse generator

2

Governor

2i

RI sensor pin

59

TDC sensor pin

001

Digital tester

010

Adapter

011

Crocodile clamp

015

Test cable with plug

016

Diagnostic socket

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

Checking

-------------------------------

1 Unscrew screw plug (11) from governor housing.

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

2 Turn RI sensor (017) into governor (injection pump).

0112 - Checking the start of delivery using digital tester (RIV method) Engines 601, 602.91, 603.91 (note deviations for off-road vehicles)

3 Turn TDC pulse generator (021) into bracket (engine).

4 Connect digital tester according to connection diagram.

5 Engine idling. Read RI value (indirect start of delivery) off digital tester at idle speed.

RI set value: 15°1° ATDC.
Vehicles with code 62/0 14°+0.5° ATDC.

6 Switch off engine.

7 Disconnect digital tester.

8 Install screw plug in governor (tightening torque 30-35 Nm).

9 Carry out leak test with engine running.

10 Check engine oil level and correct, if required.

Odkazované dokumenty