PE26.19-P-2004-60BA | Legend for block diagram of Sequentronic manual transmission (SEQ) | Transmission 716.6 in MODEL 209 with CODE (424) Sequentronic automated manual transmission (ASG) |
Code | Designation | Coordinates |
A1 | Instrument cluster | 61F |
A1p13 | Multifunction display | 60G |
A89 | DTR control unit | 48F |
A89b1 | DTR radar sensor | 47G |
A89n1 | DTR control unit | 47G |
B29 | DTR radar sensor | 43G |
B37 | Accelerator pedal sensor | 4G |
B52 | Clutch RPM sensor | 1G |
B53 | Clutch travel sensor | 1H |
B56 | Automated manual transmission pressure sensor | 1H |
B56/1 | Gear recognition sensor | 1H |
B70 | Crankshaft Hall sensor | 19H |
L5 | Crankshaft position sensor | 7H |
L6/1 | Left front rpm sensor | 40G |
L6/2 | Right front rpm sensor | 40G |
L6/3 | Left rear rpm sensor | 40H |
L6/4 | Right rear rpm sensor | 40H |
M46 | SEQ [ASG] hydraulic pump | 2G |
N3/9 | CDI control unit | 24F |
N3/10 | ME-SFI [ME] control unit | 6F |
N10/1 | Front SAM control unit with fuse and relay module | 2G |
N15/6 | Automated manual transmission control unit | 3F |
N47-5 | ESP and BAS control unit | 42F |
N63/1 | DTR control unit | 45F |
N72 | Lower control panel control unit | 67F |
N72r1 | DTR distance potentiometer | 65E |
N72s9 | DTR switch | 65E |
N72/1 | Upper control panel control unit | 64F |
N72/1s1 | ESP OFF switch | 63E |
N73 | EIS [EZS] control unit | 53F |
N80 | Steering column module | 57F |
S12 | Parking brake indicator switch | 68E |
S16/2 | Backup lamp switch | 68E |
S16/6 | Kickdown switch | 4H |
S16/10 | Gear recognition switch (voltage coded) | 1H |
S17/3 | Left door contact switch | 1H |
S17/4 | Right door contact switch | 1J |
S40/3 | Clutch pedal switch | 4H |
S40/4 | CC [TPM] switch | 55G |
S40/4s1 | Resume from memory | 55G |
S40/4s2 | Decelerate and set | 55H |
S40/4s3 | Accelerate and set | 55H |
S40/4s4 | Off | 55H |
S40/4s5 | Control contact | 55H |
S40/4s6 | Variable speed | 55H |
U1 | Valid for | 11H |
U12 | Valid for left-hand drive vehicles | 2H |
U13 | Valid for right-hand drive vehicles | 2J |
U24 | Valid for manual transmission | 5H |
U137 | Valid for engine 112 and 113 | 4D |
U199 | Valid for engine 612 | 22D |
U424 | Valid for M271 CGI | 10D |
U474 | Valid for M271 ME | 10D |
U504 | Valid for DTR | 43D |
U597 | Valid for MT [MG] | 5H |
U674 | Valid for automated manual transmission (SEQ) [ASG] | 23H |
U740 | Valid for engine 646 | 34D |
U791 | No electrical switching contact for kickdown switch (S16/6). The function is taken over phased in from the accelerator pedal sensor (B37). | 5H |
U819 | Valid for engine 272 | 16D |
U880 | Valid for engine 642 | 28D |
X11/4 | Data link connector | 3G |
Y90 | Automated manual transmission clutch solenoid valve | 2G |
Y91 | Automated manual transmission clutch solenoid valve | 2G |
Y92/1 | Automated manual transmission control solenoid valve, gear 1, 3, 5 shift | 2H |
Y92/2 | Automated manual transmission control solenoid valve, gear R, 2, 4, 6 shift | 2H |