gf4330w3202bb

Retarder control (RS) control unit, component description

Typ gf · téma 43.30 · verze 0100 · 2005-09-05

Platí pro: MODEL 374.6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (BA1) Performance-optimized Voith retarder

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.30 Retardér (hydraulický) — Řada 374 (modely 6**) · Řada 375 (modely 3**, 4**) · Řada 940 · Řada 942 · Řada 943 · Řada 944 · Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**) · Řada 958 (modely 2**, 4**)

GF43.30-W-3202BB

Retarder control (RS) control unit, component description

4.8.05

MODEL 374.6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (BA1) Performance-optimized Voith retarder

Retarder control (RS) control unit, component description

W43.30-1216-06

Illustrated on model 940

A20 Retarder control (RS) control unit

Location

The RS control unit RS (A20) is located in the electronics compartment under the dash support on the passenger side.

Task

1 General

The RS control unit (A20) controls and monitors retarder operation on the basis of a logical structured data exchange with other system components. It detects and stores all malfunctions of retarder operation.

2 To record and evaluate electric sensor signals and switch signals

The electric signals of the following sensors and switches are recorded and evaluated directly:

- Coolant temperature sensor (B65)

Retarder oil temperature sensorB66

- Pressure sensor (Y114b1)

- Engine control/permanent brake operating lever (S2)

3 Electrical actuation of the solenoid valve of the retarder valve block (Y114)

The following solenoid valves are actuated:

- Proportioning valve (Y114y2)

- Shift valve (Y114y1)

4 To record, evaluate and convey
CAN messages which are relevant for retarder operation

Via the vehicle CAN (CAN 1) CAN messages which are relevant to retarder operation are made available from other control units and vice versa are also conveyed to them.