gf0713p3121c

DFI distributor injection pump lubrication function

Typ gf · téma 07.13 · verze 0102 · 1999-04-24

Platí pro: ENGINE 602.982 in MODEL 210.017

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.13 Rotační čerpadlo systému vstřikování paliva vznětového motoru (EVE, EDC) — Řada 210 (modely 017) · Řada 602 (modely 982)

GF07.13-P-3121C

DFI distributor injection pump lubrication function

14.3.95

ENGINE 602.982 in MODEL 210.017

DFI distributor injection pump lubrication function

P07.13-0244-82

Design

13/1 Double ball bearing

13/2b Radial seal (pump end)

13/3 Drive shaft

13/4 Housing

A Oil feed

B Oil return

C Fuel feed

D Vent drilling

Operation

The drive of the distributor-type injection pump is connected to the engine oil circuit. The double ball bearing (13/1) of the intermediate flange is supplied with engine oil through the oil feed (A). The oil circuit is closed again through the oil return (B). The injection pump and fuel pump (vane cell pump) are lubricated and cooled with fuel. The oil lubrication is separated from the fuel lubrication by the radial seal (13/2b).