P97.20-2136-01
Engine hood
Front wheel well
P97.20-2137-01
P97.20-2138-09
Longitudinal member left and right rear wheel well
P97.20-2141-09
Longitudinal member front end and underbody
P97.20-2143-02
Driver and rear door
P97.20-2144-02
P97.20-2145-09
Rear end, rear cross member and liftgate
Figure item, etc. | Work instructions | ||
Danger! | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when handling anticorrosion agents. | Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
| Notes on cavity preservation | ||
| Apply wax preservation agent from inside in shaded areas following sealing and paintwork, however, before performing assembly work | Insert spray hoses as far as possible into cavities. Spray while inserting and pulling out slowly. | |
Apply repair preservation agent twice after a drying time of 5 minutes in between. | The spraying hose should be stiff and the nozzles should spray at angle to the front and rear. The cavities should be dry. | ||
Ensure that the drain holes are not plugged following drying. | The processing temperature should not be less than +15 °C. Additional preservation measures may be required, depending on the repair area, deviating from the standard cavity preservation shown. | ||
| Cavity protection, general | ||
| Processing instructions for cavity preservation agent | ||
| Combination pressure spray gun (corrosion protection) | ||
| Preservation agent |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1003-05A | Cavity sealant, solvent-free (1 l container) | A 000 986 72 70 05 |
Odkazované dokumenty
- ah9720p000101b Upozornění ke konzervaci dutin
- ap9720p064001a Pokyny pro zpracování ke konzervaci dutin
- as9700z000101a Nebezpečí exploze a otravy vlivem výparů rozpouštědel a plynů. Nebezpečí poranění očí a kůže při práci s antikorozními prostředky
- gf9800p2045a