Remove/install front acceleration sensor

AR91.60-P-0750MB

4.2.10

MODEL 215, 220.0 /1 as of 1.9.02 with CODE (803) Model year 2003

P91.60-2591-06

1 Bolts

2 Electrical connector

B48/1 Driver-side frontal acceleration sensor

B48/2 Passenger-side frontal acceleration sensor

 	Remove/Install
1	Remove headlamp assembly	 Left, right.
		Model 220 without lamp unit Xenon headlamp, code 612b.	AR82.10-P-4730M
		Model 220 with lamp unit Xenon headlamp, code 612b.	AR82.10-P-4730MA
		Model 215	AR82.10-P-4730N
2	Remove bolts (1)	 Bolt, frontal acceleration sensor to front module support	*BA91.60-P-1013-01A
3	Remove frontal acceleration sensor, driver-side (B48/1) or passenger-side (B48/2)	 Installation: Make sure that the black rimmed arrow points in the direction of travel.
4	Detach electrical connector (2) from the frontal acceleration sensor, driver side (B48/1) or passenger-side (B48/2)
5	Install in the reverse order

 Airbag

Number	Designation		Model 215	Model 220


BA91.60-P-1013-01A	Bolt, frontal acceleration sensor to front module support	NM	8	8