AR82.10-P-4730M | Remove/install headlamp unit | 8.4.98 |
MODEL 220
except CODE (612b) Xenon headlamp unit
except CODE (614) Bi-xenon headlamp unit
P82.10-2095-09
1 Screw
2 Screw
E1 Left front lamp unit
E2 Right front lamp unit
3 Wiring connector
4 Fastening shackle
5 Ball head
| Remove/Install | ||
1 | Open engine hood and move to upright position | ||
2 | Remove bolts (1, 2) | ||
3 | Unclip electrical connection (3) and remove | ||
4 | Remove left front lamp unit (E1), right front lamp unit (E2) | Protect against paint damage on bumper and fender. | |
Fold fastening shackle (4) of bumper forward slightly (arrow) and remove left front lamp unit (E1), right front lamp unit (E2) towards vehicle center. | |||
Installation: Ensure that the ball head (5) on the housing of the left front lamp unit (E1), right front lamp unit (E2) is seated in its mount. | |||
5 | Install in the reverse order | ||
| Check | ||
6 | Check settings of headlamps, correct if necessary | ||
| Check and correct headlamp setting |
Odkazované dokumenty
- ap8210p8260m Zkontrolovat, seřídit nastavení světlometů
- ar8840p1000m
- ar8840p1000m