ar9129p1421g
Removing and installing seat height adjustment drive
Typ ar · téma 91.29 · verze 0103 · 2003-04-28
Platí pro: MODELS 463.200 /204 /206 /207 /208 /209 /220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /300 /304 /307 /308 /320 /321 /324 /325 /327 /328 /330 /331 with CODE (SB5) Electrically adjustable left front seat with CODE (SB6) Electrically adjustable right front seat
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 3 Nástavba › 91 Sedadla, lůžka, zádržný systém › 91.29 Elektrická část sedadla — Řada 463 (modely 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Vnitřní výbava › 37.26 Sedadlo vpředu › 37.26.47 Nastavení sedadla — Řada 463 (modely 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Vnitřní výbava › 37.27 Sedadlo vzadu › 37.27.47 Nastavení sedadla — Řada 463 (modely 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Vnitřní výbava › 37.28 Sedadlo pro cestující › 37.28.46 Nastavení sedadla — Řada 463 (modely 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
AR91.29-P-1421G
| Removing and installing seat height adjustment drive
| 19.7.99
|
MODELS 463.200 /204 /206 /207 /208 /209 /220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /300 /304 /307 /308 /320 /321 /324 /325 /327 /328 /330 /331
with CODE (SB5) Electrically adjustable left front seat
with CODE (SB6) Electrically adjustable right front seat
1 Screw for seat height adjustment motor
2 Bracket screws
3 Bracket
4 Plastic clip
5 Plug-in wiring plug connection
6 Plug-in wiring plug connection
7 Tie strap
M18m1 Seat height motor
M19m1 Seat height motor
| Remove/Install
|
|
|
1
| Move front seat all the way forward
|
|
|
2
| Remove the screws securing the seat height adjustment motor (1).
| Pull up the seat until access to the screws (2) and the plug-in wiring connection (5, 6) is available.
|
|
3
| Cut off the wire ties (7).
|
|
|
4
| Disconnect electrical connector (5, 6) from seat height motor (M18m1, M19m1)
| Mark terminals to prevent any risk of incorrect connections.
|
|
5
| Remove screws at bracket (2)
|
|
|
6
| Remove bracket (3) from seat frame.
| Installation: lightly grease plastic clip (4) before installation.
|
|
7
| Remove seat height motor (M18m1, M19m1)
|
|
|
8
| Install in the reverse order
|
|
|
9
| Run an operational check on front seat
| See Operating Instructions
|
|
