ar8860w2901c

Removing, installing front flap

Typ ar · téma 88.60 · verze 0100 · 1998-06-16

Platí pro: MODEL 957 with BODY 957.810

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.60 Vnější víka — Řada 957

EinPAS 35 Karoserie/rám/montované díly › 35.36 Kapota/víko/uzávěr › 35.36.31 Přední víko — Řada 957

AR88.60-W-2901C

Removing, installing front flap

17.11.97

MODEL 957 with BODY 957.810

Removing, installing front flap

W88.60-0009-11

1 Screws

2 Front flap

 	Removal, installation
1	Release front flap and set up
2	Unscrew screws (1) from hinge for front flap (2)	 Leave hinges and gas pressure damper on cab.
3	Remove front flap (2)
4	Install in opposite order
5	Check gap and installation depth of front flap	Gap between front flap and corner section	*BE88.60-N-1001-01B
		Gap between front flap and front end cover	*BE88.60-N-1002-01B
		Installation depth of front flap in relation to top corner section	*BE88.60-N-1003-01B
		Installation depth of front flap in relation to bottom corner section	*BE88.60-N-1004-01B
		If dimension deviate 
		Adjust front flap	AR88.60-W-2901-01A

Test values for front flap

Number	Designation		Model 957


BE88.60-N-1001-01B	Gap between front flap and corner section		51
BE88.60-N-1002-01B	Gap between front flap and front end cover		7.51
BE88.60-N-1003-01B	Installation depth of front flap in relation to top corner section		8.51
BE88.60-N-1004-01B	Installation depth of front flap in relation to bottom corner section		8.51

Odkazované dokumenty

ar8860w290101a