Removing and installing engine hood

Typ ar · téma 88.40 · verze 0103 · 2001-05-11

Platí pro: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AR88.40-D-3000A

17.2.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

D88.00-0016-09

1 Engine hood

2 Hood support

5 Hinge

6 Collared nut

3 Collar bolt

4 Washers

	Removing
1	Unscrew collar nuts (6) at the hinge (5)	 Support engine hood to prevent damage
2	Unscrew hood support (2) and remove engine hood
	Installation
3	Place engine hood on hinges (5)	 Only position collar nuts and do not tighten
4	Install hood support and bolt securely
5	Adjust engine hood		AR88.40-D-3020A
6	Grease hinges (5)