ar8820w2000d

Removing and installing front bumper

Typ ar · téma 88.20 · verze 0103 · 2012-02-24

Platí pro: MODEL 375.3 with BODY 375.810 MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 88 Nástavbové díly, vnější víka › 88.20 Nárazník — Řada 375 (modely 3**, 810) · Řada 940 (modely 899) · Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**)

EinPAS 35 Karoserie/rám/montované díly › 35.38 Nárazník / spoiler / venkovní kryty / úložné schránky/ ochrana přídě vozu › 35.38.30 Přední nárazník — Řada 375 (modely 3**, 810) · Řada 940 (modely 899) · Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**)

AR88.20-W-2000D

Removing and installing front bumper

16.2.12

MODEL 375.3 with BODY 375.810

MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Removing and installing front bumper

W88.20-1001-09

1 Bumper

2 Bayonet connector

3 Torx screw

7 Paneling

4 Hex. head screw

5 Torx screw

6 Torx screw

Removal, installation

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

All models

AH54.10-P-0001-01A

2

Disconnect headlamp connectors (2)

3

Remove paneling (7)

4

Fold up caps on coupling jaw

5

Remove bumper (1)

6

Install in the reverse order

7

Check headlamps, adjust

AP82.10-W-8260A

Odkazované dokumenty