ar8610p0114a

Remove/install extinguishing agent pressure hose

Typ ar · téma 86.10 · verze 0101 · 2009-05-26

Platí pro: MODEL 463.236 /248 with CODE (979) Special protection version with CODE (ZS6) Special protection version FB6 with fire extinguishing system MODEL 463.236 /248 with CODE (979) Special protection version with CODE (ZS7) Special protection version FB7 with fire extinguishing system

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 86 Nouzová zařízení, výbava pro postižené osoby, sanitární vybavení, kuchyňka › 86.10 Nouzové přístroje — Řada 463 (modely 236, 248)

EinPAS 27 Systémy pasivní bezpečnosti/zádržné systémy › 27.21 Hasicí zařízení/systém hlášení požáru › 27.21.13 Potrubí/hadice/ventil — Řada 463 (modely 236, 248)

AR86.10-P-0114A

Remove/install extinguishing agent pressure hose

30.4.09

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS6) Special protection version FB6
with fire extinguishing system

MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS7) Special protection version FB7
with fire extinguishing system

Remove/install extinguishing agent pressure hose

P86.10-2114-06

1 Right catalytic converter

2 Heat shield

3 Extinguishing agent pressure hose

4 Engine/undercarriage extinguishing agent line

5 Right underbody extinguishing agent line

6 Securing clamp

Remove/install

1

Disconnect electrical connector from extinguishing agent tank 1 squib (R42x1) and electrical connector from extinguishing agent tank 2 squib (R42/1x1)

To prevent the fire extinguishing system from being actuated, first disconnect electrical connector from extinguishing agent tank 1 squib (R42x1) or electrical connector from extinguishing agent tank 2 squib (R42/1x1) as first operation step.

AR86.10-P-0104A

Notes on squib on extinguishing agent tank

AH86.10-P-0001-04A

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

2

Lift/jack up vehicle

When lifting the vehicle do not damage fire extinguishing agent lines on fire extinguisher, otherwise this could lead to malfunction of the fire extinguishing system

AR00.60-P-1000G

3

Remove right catalytic converter (1)

with code (K89) Emission control system with three-way catalytic converter. See:

Remove/install exhaust system complete

Engine 113.962 in model 463.248

AR49.10-P-7000GL

Engine 273 in model 463

AR49.10-P-7000GZG

4

Remove heat shield (2)

5

Remove underfloor right extinguishing agent line (5) from extinguishing agent pressure hose (3)

Installation: Observe tightening instructions.

See:

Tightening instructions for fire extinguishing system extinguishing agent lines

AR86.10-P-0114-01A

6

Remove extinguishing agent pressure hose (3) from engine/undercarriage extinguishing agent line (4)

Installation: Observe tightening instructions.

See:

Tightening instructions for fire extinguishing system extinguishing agent lines

AR86.10-P-0114-01A

7

Remove mounting clamp (6) from vehicle frame and remove extinguishing agent pressure hose (3)

8

Install in the reverse order

Odkazované dokumenty