ar8370d5807e

Remove and install combustion and heater air blower

Typ ar · téma 83.70 · verze 0103 · 2003-09-29

Platí pro: MODELS 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater B3L-C compact heater MODELS 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater D3L-C compact heater MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater B3L-C compact heater MODELS 901.66# /67#, 902.66# /

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.70 Nezávislé topení, přídavné topení, přihřívač — Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)

EinPAS 39 Topení/větrání/chlazení › 39.25 Nezávislé topení/přídavné topení › 39.25.30 Topné zařízení — Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)

AR83.70-D-5807E

Remove and install combustion and heater air blower

8.9.97

MODELS 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
B3L-C compact heater

MODELS 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
B3L-C compact heater

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

MODELS WD1##, WD2##, WD3##, WD6##, WD7## ### up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

Remove and install combustion and heater air blower

D83.70-1309-06

1 Seal

2 Cover

3 Bolt

4 Upper casing half

5 Insulating shell

6 Outlet shroud

7 Glow plug

8 Heat exchanger

9 Lower casing half

10 Seal

11 Combustion and heater air blower

12 Bolt

13 Auxiliary heating control unit

14 14-pin plug

15 Overheating sensor plug

16 Flame sensor plug

Remove/Install

1

Remove heater unit

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 as of 753731 as of 03.11.97

AR83.70-D-5302G

Models 901.6, 902.6, 903.6, 904.6,

WD1, WD2, WD3, WD6, WD7 up to 382001 up to 11.03.02

AR83.70-D-5302K

2

Remove heater from the housing

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 as of 753731 as of 03.11.97

AR83.70-D-5399C

Models 901.6, 902.6, 903.6, 904.6,

WD1, WD2, WD3, WD6, WD7 up to 382001 up to 11.03.02

AR83.70-D-5399A

3

Unscrew bolt (3) and remove cover (2) with gasket (1)

Installation: Check gasket (1) for damage and replace if necessary.

4

Unlock 14-pin plug (14) and disconnect from auxiliary heater control unit (13)

5

Detach connection lines from the glow plug (7)

6

Detach trim parts (4, 5, 6, 9)

AR83.70-D-5398-05C

7

Disconnect plug of flame sensor and overheating sensor (15, 16) from auxiliary heater control unit (13)

8

Detach combustion air blower and hot air blower (11) from heat exchanger (8)

9

Remove gasket (10)

Installation: Clean sealing surfaces. Install new gasket (10).

10

Install in the reverse order

Odkazované dokumenty