AR83.50-T-5115BAS | Removing and installing condenser (roof version) blower bridge | 12.2.03 |
MODELS NMB613.358 /388 with CODE (HKD) Konvekta ACX 640 air conditioning with roof heater
MODELS NMB613.455 with CODE (HKE) Konvekta ACX 642 air conditioning with roof heater
MODELS NMB613.455 with CODE (HKB) Konvekta ACX 641 SAPTCO air conditioning without roof heater
T83.50-0056-01
Shown on model 613.455 with Konvekta ACX 642 air conditioning without roof heater code HKE
6 Cover
7 Cover
8 Trim panel
T83.50-0031-11
Shown on model 613.455 with Konvekta ACX 641 SAPTCO air conditioning without roof heater code HKB
1 Condenser blower bridge
2 Bolt
3 Condenser fan
4 Capacitor
5 Electrical connector
| Remove/install | ||
Danger! | Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area. | ||
1 | Remove cover (7). | ||
2 | Remove both panelings (8) from the evaporator units | Model 613.455 with Konvekta ACX 641 SAPTCO air conditioning without roof heater code HKB | |
Models 613.358/388 with Konvekta ACX 640 air conditioning with roof heater code HKD, Model 613.455 with Konvekta ACX 642 air conditioning without roof heater code HKE | |||
3 | Remove cover (6) above filter drier. | Only models 613.358/388 with Konvekta ACX 640 air conditioning with roof heater code HKD, Model 613.455 with Konvekta ACX 642 air conditioning without roof heater code HKE | |
4 | Remove rear condenser fan (3) and place aside | Do not separate electrical connector from condenser fan (3). | |
5 | Disconnect plug and socket connection (5) | ||
6 | Attach removed condenser fan (3) provisionally | ||
7 | Loosen screw (2) | ||
8 | Remove condenser fan bridge (1) from condenser (4) with an assistant | ||
9 | Install in the reverse order |
Odkazované dokumenty
- ar8350t5010bac
- ar8350t5010bas
- ar8350t5015bac
- ar8350t5060bas
- as6500z000201a Nebezpečí ohrožení života pádem ze střechy vozidla. Nebezpečí poranění druhých osob padajícími předměty při pracích v oblasti střechy