AR83.40-P-6350AK | Remove and install control and operating unit | 20.7.06 |
MODEL 169.0 /3, 245.2 with CODE (580) Automatic air conditioning
P83.40-2805-08
Shown on code (527) COMAND APS
(with navigation)
1 Instrument panel
2 Cables
5 Electrical connector
N22 AAC [KLA] control and operating unit
3 Retaining clips
4 Electrical connectors
Modification notes
| Remove/install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
1.1 | Save basic data of AAC [KLA] control and operating unit (N22) in STAR DIAGNOSIS temporarily | When replacing the AAC [KLA] control and operating unit (N22). | |
Installation: Transfer temporarily stored basic data to the new AAC [KLA] control and operating unit (N22). | |||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
2.1 | Remove radio | On vehicles with code (520) Radio | |
2.2 | Remove COMAND operating, display and controller unit | On vehicles with code (527) COMAND APS (with navigation) | |
2.3 | Remove center air outlet | On vehicles without code (520) Audio 5 CD radio | |
3.1 | Remove control and operating unit cover | On vehicles without code (520) Audio 5 CD radio | |
4.1 | Remove mounting screws of the radio cover's carrier frame and remove carrier frame | On vehicles without code (520) Audio 5 CD radio | |
5 | Set knob of air distribution to general ventilation position (arrow A) | As a result, the cable levers on the AAC [KLA] control and operating unit (N22) are moved to a favorable removal and assembly position. | |
6.1 | Tilt top of AAC [KLA] control and operating unit (N22) forward and take out of the side mountings (arrow B) on the instrument panel (1) | On vehicles with code (523) MB Audio 20 radio | |
Installation: Observe installation position and proper seating of AAC [KLA] control and operating unit (N22) in the instrument panel (1). | |||
6.2 | Press in catch lugs on side of AAC [KLA] control and operating unit (N22) using a suitable screwdriver and loosen AAC [KLA] control and operating unit (N22) from the instrument panel (1) | On vehicles without code (523) MB Audio 20 radio | |
Installation: Observe installation position and proper seating of AAC [KLA] control and operating unit (N22) in the instrument panel (1). | |||
7 | Lead AAC [KLA] control and operating unit (N22) toward the rear out of the instrument panel (1) | Swivel AAC [KLA] control and operating unit (N22) forward on the left side and then lead on the right side out of the instrument panel (1). | |
8 | Turn AAC [KLA] control and operating unit (N22) around until the cables (2) are accessible | ||
9 | Release cables (2) via the retaining clamps (3) and press down from the cable levers on the AAC [KLA] control and operating unit (N22) using a suitable screwdriver | Carefully release cables (2) so that the retaining clamps (3) do not snap off. | |
10 | Release and disconnect electrical connectors (4). | ||
11 | Disconnect electrical connectors (5) and remove AAC [KLA] control and operating unit (N22) | ||
12 | Install in the reverse order |
Workshop equipment/MB testers (see Workshop Equipment Manual)
WE58.40-Z-1013-06A | STAR DIAGNOSIS Compact diagnosis system for passenger cars, order number 6511 1801 00 |
Odkazované dokumenty
- ad0000p200004ak
- ah5400p000101a Upozornění k zamezení poškozením elektronických součástí elektrostatickým výbojem
- ar6820p2314ak
- ar8260p7502ak Demontáž, montáž rádia
- ar8285p1000ak Demontáž a montáž ovládací, zobrazovací a řídicí jednotky COMAND
- ar8310p4503ak