P83.10-2505-09
Shown on model 169.0 with code (581) Comfort automatic air conditioning
1 Center air outlet
2 Adjusting knurl (with code (581) Comfort automatic air conditioning)
5 Puller hook
S6 Hazard warning flasher switch
3 Instrument panel
4 Catch hook
Modification notes
| Remove | ||
1 | Close air vent of dashboard on top via adjusting knurl (2) | On vehicle up to 24.5.07 with code (581) Comfort automatic air conditioning | |
The air vent of the dashboard has to be closed on top so that the air ducting or the actual center air vent (1) is not damaged when removing the center air vent (1). | |||
2 | Release catch hooks (4) of center air vent (1) using pulling hook (5) | The catch hooks (4) are located on the left and right sides in the center air vent (1) and are released with the topmost horizontal slat (arrow). The extraction hooks (5) are inserted below the catch hooks (4) and the front ends of the extraction hooks (5) have to be horizontal in the process. The pulling hooks (5) are then rotated upward by 90° while at the same time the catch hooks (4) are pushed towards the inside. The pulling hooks (5) are adequately secured in a cutout on the catch hooks (4) so that the center air vent (1) can be pulled out. | |
| |||
3 | Pull out center air vent (1) from dashboard (3) using pulling hook (5) until the hazard warning flasher switch (S6) on the rear becomes accessible | | |
4 | Disconnect electrical connector from hazard warning flasher switch (S6) | ||
5 | Take center air vent (1) out of dashboard (3) | ||
6 | Release hazard warning flasher switch (S6) on both sides of the center air vent (1) and remove | Only when replacing the hazard warning flasher switch (S6) or the center air vent (1). | |
7 | Remove pulling hook (5) from center air vent (1) | | |
| Install | ||
8 | Insert hazard warning flasher switch (S6) into center air vent (1) | Only when replacing the hazard warning flasher switch (S6) or the center air vent (1). | |
Ensure that the hazard warning flasher switch (S6) is properly seated in the center air vent (1). | |||
9 | Insert center air vent (1) into dashboard (3) and connect electrical connector to hazard warning flasher switch (S6) | ||
10 | Latch center air vent (1) into dashboard (3) | Ensure that the center air vent (1) is properly seated in the dashboard (3). | |
11 | Check function of center air vent (1) and hazard warning flasher switch (S6) |
Pulling hook
140 589 02 33 00