ar8330s5520a

Removing and installing expansion valve

Typ ar · téma 83.30 · verze 0109 · 2010-07-13

Platí pro: MODEL 638 with CODE (H06) Air conditioning

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.30 Klimatizace — Řada 638

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.13 Potrubí/hadice/ventil — Řada 638

AR83.30-S-5520A

Removing and installing expansion valve

12.7.10

MODEL 638 with CODE (H06) Air conditioning

Removing and installing expansion valve

S83.30-2010-09

1 Refrigerant lines (evaporator)

2 Supporting plate

3 Sealing ring

4 Expansion valve

5 Sealing ring

6 Sealing ring

7 Screw

8 Nut

9 Refrigerant lines

10 Screw (engines 111, 601, 611.980)

11 Nut (engines 111, 601, 611.980)

12 Bracket (engines 111, 601, 611.980)

13 Sealing ring

Removing, installing

Danger!

Risk of explosion through welding or soldering operations on closed air conditioning system. Risk of poisoning through inhaling overheated refrigerant vapors. Risk of injury through skin and eye contact with fluid coolant

Do not carry out welding operations on closed air conditioning system or around it. Smoking and naked flame are forbidden. Wear protective glasses and protective gloves, work only in well ventilated areas. Only carry out repair operations on air conditioning circuit with system drained.

AS83.00-Z-0001-01A

When working on refrigerant circuit, close off all openings with suitable covers to prevent unnecessary ingress of moisture and dirt.

All sealing rings must be replaced and moistened with compressor oil.

1

Drain air conditioning

AR83.30-S-1760A

2.1

Remove screw (10)

Only with engines 111, 601, 611.980

Counter-hold nut (11).

3

Remove nut (8), detach refrigerant lines (9) from expansion valve (4)

Installation: Replace sealing rings (5, 6) and moisten with compressor oil.

*BA83.30-N-1001-01A

4

Remove screws (7) and detach expansion valve (4)

Installation:Replace sealing rings (3, 13) and moisten with compressor oil.

Ensure that supporting plate (2) does not fall into heater housing.

*BA83.30-N-1002-01A

5

Replace fluid reservoir

Fluid reservoir is to be replaced whenever air conditioning is worked on.

AR83.30-S-6520A

6

Install in the reverse order

Air conditioning

Number

Designation

Model
638

BA83.30-N-1001-01A

Nut, suction/high-pressure line to expansion valve

Nm

10

BA83.30-N-1002-01A

Screw, expansion valve

Nm

8

Odkazované dokumenty