P83.25-2152-08
Shown on model 240.078
1 Seal
2 Water collector
4 Bolt
3 Rubber seal
| Remove/Install | ||
1 | Remove wiper arms | ||
2 | Remove seals (1) at the wiper shafts | ||
3 | Loosen rubber seal (3) in the area of the water collector (2) | ||
4 | Unscrew bolts (4) at the water collector (2) | ||
5 | Unclip water collector (2) in the area of the windshield (arrows) | | |
6 | Detach outer ends of the water collector (2) at the A-pillar and remove the water collector (2) | Lower engine hood slightly. Installation: Ensure correct seating of the outer ends of the water collector (2) at the A-pillar. | |
7 | Install in the reverse order |
Assembly wedge
110 589 03 59 00