P83.25-2261-06
Shown on model 169.0
1 Water collector
2 Roof trim strip
3 Bolt
4 Retaining detents
5 Rubber grommet
| Remove/install | ||
1 | Remove both wiper arms | ||
2 | Remove grommet (5) | Installation: Ensure that the rubber grommet (5) is seated correctly in water collector (1). | |
3 | Unscrew bolts (3) | ||
4 | Pull water collector (1) downward to loosen the catch connection to the windshield. In doing so, push the ends (arrow) of the roof trim strips (2) aside a little | Installation: Guide retaining catches (4) of water collector (1) under the windshield. | |
5 | Guide water collector (1) upwards and out over the windshield | While doing so, slightly lower the engine hood if necessary. | |
6 | Install in the reverse order |
Odkazované dokumenty
- ar8230p6100ak Demontáž, montáž ramena stěrače