ar8325p1402ak

Remove/install water collector

Type ar · topic 83.25 · version 0101 · 2005-04-14

Applies to: Model 169.0 /3, 245.2

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 169 (models 0**, 3**) · Series 245 (models 2**)

AR83.25-P-1402AK

Remove/install water collector

18.3.04

Model 169.0 /3, 245.2

Remove/install water collector

P83.25-2261-06

Shown on model 169.0

1 Water collector

2 Roof trim strip

3 Bolt

4 Retaining detents

5 Rubber grommet

Remove/install

1

Remove both wiper arms

AR82.30-P-6100AK

2

Remove grommet (5)

Installation: Ensure that the rubber grommet (5) is seated correctly in water collector (1).

3

Unscrew bolts (3)

4

Pull water collector (1) downward to loosen the catch connection to the windshield. In doing so, push the ends (arrow) of the roof trim strips (2) aside a little

Installation: Guide retaining catches (4) of water collector (1) under the windshield.

5

Guide water collector (1) upwards and out over the windshield

While doing so, slightly lower the engine hood if necessary.

6

Install in the reverse order

Referenced documents