P82.35-2005-06
Illustrated on model 220
1 Washing water heater hoses
2 Nut
3 Coolant expansion reservoir
4 Washing water reservoir
5 Electrical connector on coolant expansion reservoir
M5/1 Windshield washer pump
M5/2 Headlamp washer pump
| Removal, installation | ||
1 | Open engine hood and move to upright position | ||
2 | Remove washing water heater hoses (1) on washing water reservoir (4) | ||
3 | Unscrew nuts (2) and lift coolant expansion reservoir (3) up and lay down to side | ||
Danger! | Danger of severe burns to skin and eyes from hot coolant spewing out. Coolant is toxic when swallowed | Open cooling system only when coolant temperature is below 90 °C Open cover slowly and reduce pressure Do not fill beverage containers with coolant Wear protective gloves, protective clothing and protective goggles | |
4 | Unclip electrical connector (5) from coolant expansion reservoir (3) and place coolant expansion reservoir (3) to side | ||
5 | Unclip electrical connector (6) from washing water reservoir (4) | ||
6 | Pull windshield washer pump (M5/1) and headlamp washer pump (M5/2) up completely out of washing water reservoir (4) together with outlet hoses and electrical connections | Catch washing water | |
7 | Remove washing water reservoir (4) upward | ||
8 | Install in opposite order | ||
9 | Fill windshield washer reservoir | For mixing ration see table on package | |
10 | Check pumps for proper function |
Odkazované dokumenty
- ar8840p1000m
- ar8840p1000m
- as2000z000101a Nebezpečí poranění kůže a očí opařením vystřikující, horkou chladicí kapalinou. Nebezpečí otravy při požití chladicí kapaliny