AR82.10-P-4730GH | Remove/install headlamp unit | 13.1.97 |
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
P82.10-0738-06
1 Cover
2 Bolt
3 Nuts
4 Drift
E1 Left front headlamp unit
E2 Right front headlamp unit
X24 Headlamp wiring harness connector
| Remove/Install | ||
1 | Open engine hood | ||
2 | Unlock cover (1) at the clip (arrow A) under the lamp unit and unhook | Installation: Lock clip again. | |
3 | Unscrew screw (2) | ||
4 | Unscrew nuts (3). | Installation: Align the lamp unit so that the distance of the cover to the bumper is even. | |
5 | Unhook left front headlamp unit (E1) or right front headlamp unit (E2) from the hole (arrow B) using drift (4) and pull forwards | ||
6 | Disconnect headlamp harness connector (X24) | ||
7 | Remove headlamp unit toward front | ||
8 | Install in the reverse order | ||
9 | Perform function check | ||
10 | Check and correct headlamp adjustment | ||
| Check and correct headlamp adjustment |
Odkazované dokumenty
- ap8210p8260gh Zkontrolovat, seřídit nastavení světlometů