AR82.10-P-1201A | Removing and installing bulbs of headlamp unit | 8.6.98 |
MODEL 129
except CODE (491) U.S. version
except CODE (612b) Xenon headlamp unit
P82.10-2129-12
1 Locking bow
2 Housing cover
3 Electrical connector for low beam/high beam headlamps
4 Parking lamp socket
5 Low beam/high beam mounting clamp
E1e1 Right high beam
E1e2 Right low beam
E1e3 Right standing and parking lamp
| Removal, installation | ||
1 | Open engine hood, move to upright position | See Owner's Manual, model 129. | |
2 | Remove windshield washer reservoir | Only required for right headlamp unit. | |
3 | Open locking bow (1) | ||
4 | Take off housing cover (2) | Check seal for damage and wear and replace if necessary. | |
5 | Disconnect electrical connector (3) from corresponding bulb | ||
6 | Open mounting clamp of corresponding bulb | ||
N | Remove bulb | Do not touch bulbs with bare fingers. Use soft, grease-free rag. | |
8 | Install in opposite order | ||
9 | Perform function check |