AR72.12-P-1010AL | Remove/install rear door lining | 1.3.07 |
Model 169.0, 245.2 except CODE (584) Rear power windows (2 doors)
P72.12-2632-09
Shown on model 169.0 with code (955) Elegance
1 Door lining
2 Covering
3 Bolts
6 Release cable
7 Inside door opener
4 Clip
5 Electrical connector (on model 169.0 with code (955) Elegance)
| Remove/Install | ||
1 | Completely lower crank window | ||
2 | Remove rear door power window lever | ||
3 | Unclip covering (2) | ||
4 | Unscrew bolts (3) | Installation: Apply screw securing agent to bolt thread (3) | |
| |||
Loctite 262 | |||
5 | Unclip door lining (1) from clips (4) with mounting wedge | | |
Installation: Replace damaged clips (4). | |||
6 | Remove door lining (1) upward from rear door until electrical connector (5) and release cable (6) are accessible | Electrical connector (5) only on model 169.0 with code (955) Elegance. | |
7.1 | Disconnect electrical connector (5) from left rear door entrance/exit lamp or right rear door entrance/exit lamp | Model 169.0 with code (955) Elegance | |
8 | Unclip release cable (6) from inside door opener (7) and remove door lining (1) | ||
9 | Install in the reverse order |
Rear door
Mounting wedge
110 589 03 59 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1059-02A | Loctite 262 | Henkel Loctite Deutschland GmbH |