ar7212p1811ak

Remove/install rear door power window lever

Typ ar · téma 72.12 · verze 0100 · 2005-04-21

Platí pro: Model 169.0, 245.2 except CODE (584) Rear power windows (2 doors) Window crank

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 72 Dveře › 72.12 Zadní dveře — Řada 169 (modely 0**) · Řada 245 (modely 2**)

EinPAS 36 Výhled › 36.15 Sklo/okno › 36.15.50 Ovládání okna — Řada 169 (modely 0**) · Řada 245 (modely 2**)

AR72.12-P-1811AK

Remove/install rear door power window lever

16.2.05

Model 169.0, 245.2 except CODE (584) Rear power windows (2 doors)
Window crank

Remove/install rear door power window lever

P72.12-2626-09

Shown on model 245.2

1 Window crank

2 Lock

5 Rosette

3 Power window channel

4 Pin

Remove

1

Move crank window (1) upward vertically and firmly press lock (2) down with fingers and remove crank window (1) from power window channel (3).

Install

2

Install window crank (1) on power window channel (3) until window crank (1) completely engages on power window channel (3).

Observe installation position: Pin (4) on rosette (5) points upward.
The left and right window cranks (1) should be in the same position when the windows are closed.