P72.10-2381-11
Shown on left front door
1 Door foil
2 Electrical connector
3 Inner door panel
4 Multipoint connector
N69/1 Door control unit front left
N69/2 Door control unit front right
P72.10-2454-11
Rear view of door foil
1 Door foil
5 Butyl cord
Modification notes
| Removal | ||
1 | Remove front door lining | ||
2 | Disconnect electrical connector (2) from front speaker | ||
3 | Disconnect all electrical connector from left front door control unit (N69/1) and right front door control unit (N69/2) | ||
4 | Separate electrical connectors of multipoint connector (4) | ||
5 | Detach butyl cord (5) from inner door panel (3) with suitable tool or cut | Avoid damaging paint on inner door panel (3), risk of corrosion. The door foil (1) can also be detached partially, in order to reach components underneath. | |
6 | Guide Bowden cable and electrical lines out through door foil (1) and remove door foil (1) | ||
| Install | ||
7 | Check door foil (1) and replace if damaged | When replacing door foil (1) remove butyl cord (5) residues from inner door panel (3) and clean bonding surfaces. | |
Cleaner | |||
8 | Check butyl cord (5) and replace if damaged | If butyl cord is partially damaged (5) replace only damaged section of butyl cord (5). Route new butyl cord (5) parallel to damaged butyl cord (5) on door foil (1).Remove butyl cord (5) residues from inner door panel (3) and clean gluing areas | |
Sealing cord | |||
Cleaner | |||
9 | Guide Bowden cable and electrical lines through corresponding cutouts in door foil (1). | When replacing door foil (1) separate at perforations. | |
10 | Place door foil (1) on the inner door panel (3) and roll on | Ensure that the door foil (1) is exactly matched up on the inner door panel (3). Do not conceal holes in inner door panel (3) for mounting clips on door lining. | |
| |||
11 | Connect electrical connector (2) to front speaker. | ||
12 | Connect electrical connectors to left front door control unit (N69/1) and right front door control unit (N69/2) | ||
13 | Connect electrical connectors of multipoint connector (4) | ||
14 | Install door lining in front door |
Roller
168 589 05 63 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1086-01A | Soft top frame sealing profile with metal core 35 m, SEALANT/butyl Bostik 1127 | A 005 989 12 71 10 |
BR00.45-Z-1025-04A | Cleaner | A 005 989 19 71 |