P72.10-2382-09
1 Door lining
2 Cover
3 Mirror triangle cover
7 Bolts
8 Door lock cover
9 Bowden cable
4 Bolt
5 Male multipoint connector
6 Armrest cover
Modification notes
| Remove/Install | ||
1 | Lower window in front door | See operator's manual. | |
2 | Unclip mirror triangle cover (3) (arrow) and disconnect electrical connector from tweeter | ||
3 | Remove cover (2) from door lining and remove | ||
4 | Unscrew screw (4) and unclip male multipoint connector (5) | ||
5 | Unclip armrest cover (6) and unscrew bolts (7) below | ||
6 | Remove covering of door lock (8) | ||
7 | Pry off door lining (1) from inner door panel with mounting wedge at mounting clips | Move mounting wedge (1) directly onto each mounting clip and ensure that the retainer tabs of the mounting clips do not tear out of the door lining (1) | |
| |||
Installation: Replace damaged mounting clips. | |||
8 | Lift door lining (1) upward and simultaneously pull away from inner door panel until Bowden cable (9) is accessible | ||
9 | Remove Bowden cable (9) at inner door opener | ||
10 | Disconnect electrical connectors between door lining (1) and front door control module | ||
11 | Remove door lining (1) | ||
12 | Install in the reverse order |
Mounting wedge
110 589 03 59 00