P68.30-2655-07
Shown on vehicle with code (943) Automatic extendable main loading floor
1 Rear center section paneling
2 Bolts
4 Load compartment floor lock
3 Striker eye flap
Modification notes
| Remove/install | ||
1 | Remove left side paneling in load compartment | ||
2 | Open load compartment floor upwards | ||
3 | Unscrew screws (2) from rear center section paneling (1). | ||
4.1 | Unscrew mounting screws on loading floor lock (4). | On vehicles without code (943) Automatic extendable main loading floor | |
5 | Remove rear center section paneling (1) from retaining arrests toward rear | Installation: Ensure that rear center section paneling (1) is seated correctly below left and right paneling (arrows). | |
6.1 | Remove locking eye flap (3) from rear center section paneling (1). | Only when replacing rear center section paneling (1) or locking eye flap (3). | |
7 | Install in the reverse order |