P68.30-3119-06
1 Upper B-pillar paneling
2 Paneling of bottom of B-pillar
3 Cover
4 Bolt
5 Air outlet
6 Catches
7 Bracket
8 Guide
P68.30-3120-02
1 Upper B-pillar paneling
9 Seat belt height adjustment paneling
10 Upper guide
11 Lower guide
12 Seat belt height adjustment mechanism
P68.30-3121-10
13 Paneling
14 Seat belt end fitting
15 Bolt
16 Arresting lug
| Remove/Install | ||
1 | Move front seat forward | See Operator's Manual | |
2 | Remove door sill molding | Left or right side. | |
3 | Remove edge guard in area of B-pillar on rear door | Installation: Ensure that edge guard is seated correctly. | |
4 | Remove air outlet (5) with suitable tool | Removal: The air outlet is fastened with 4 catches (6).Pull catches (6) toward inside with suitable tool and remove air outlet | |
5 | Unclip cover (3) | ||
6 | Unscrew bolt (4) | ||
7 | Remove paneling (13) from front seat | ||
8 | Unscrew bolt (15) from belt end fitting (14) and remove belt end fitting (14) | Installation: Ensure that seat belt does not twist and that the arresting lug (16) is seated correctly in the guide. | |
| |||
9 | Remove edge guard in area of B-pillar from front door | Installation: Ensure that edge guard is seated correctly. | |
10 | Unclip upper B-pillar paneling (1) | Install seat belt through belt height adjustment paneling (9) | |
Removal: Position mounting wedge directly to clips (arrows) | |||
Installation: Ensure that upper guide (10), lower guide (11) and belt height adjustment paneling (9) are seated correctly on belt height adjustment (12). | |||
Mounting wedge | |||
11 | Unclip lower B-pillar paneling (2) | Installation: Position mounting wedge directly to clips (arrows) | |
Installation: Slide guide (8) on lower B-pillar paneling (2) into mount (7). | |||
Mounting wedge | |||
12 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Mounting wedge
110 589 03 59 00