ar6830p4300rt

Remove/install headliner

Typ ar · téma 68.30 · verze 0200 · 2006-08-16

Platí pro: MODEL 251 with CODE (413) Panoramic glass roof with top sliding roof

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 251

EinPAS 37 Vnitřní výbava › 37.45 Obložení › 37.45.32 Stropní obložení — Řada 251

AR68.30-P-4300RT

Remove/install headliner

3.8.06

MODEL 251 with CODE (413) Panoramic glass roof with top sliding roof

Remove/install headliner

P68.30-3186-11

Illustrated on model 251.1

1 Headliner

Remove/install headliner

P68.30-3187-07

2 Trim

F4 Load compartment fuse and relay box

3 Electrical connector

Remove/install headliner

P68.30-3188-07

4 Cable tie

5 Cable tie

6 Electrical connector

7 Electrical connector

W29/9 Ground (right D-pillar)

W48/3 Ground (headliner supply)

8 Electrical connector

9 Electrical connector

10 Electrical connector

Remove/install headliner

P68.30-3189-09

11 Connector

12 Electrical connector

15 Luggage net holder covers

13 Bolts

14 Clips

Remove/install headliner

P68.30-3190-09

1 Headliner

16 Retaining rail

17 Retaining tabs

18 Mounting rails

Modification notes

26.7.06

"Disconnect/connect battery ground line" removed

Step 1

Remove/install

1

Remove paneling on A-pillar.

On left and right.

AR68.30-P-4050RT

2

Remove sun visors

On left and right.

AR68.60-P-5480RT

3

Remove front overhead control panel.

AR82.20-P-1100RT

4

Remove grab handle from roof at front

On left and right.

AR68.30-P-4330RT

5

Completely move front seats toward front, position backrests vertically and move head restraints (front and rear) upward.

Serves as support for headliner (1)

6

Remove paneling on B-pillar

Remove only B-pillar upper section

AR68.30-P-4700RT

On left and right.

7

Remove rear grab handle from roof

On left and right.

AR68.30-P-4330RTA

8

Remove door sill molding

Only rear, left and right.

AR68.30-P-4100RT

9

Remove moldings from C-pillar

On left and right.

AR68.30-P-4490RT

10

Fold back rear seats

3rd seat row, left and right

11

Remove moldings from D-pillar

On left and right.

AR68.30-P-4495RT

12

Remove Parktronic system warning display (PTS) in rear

Only with Parktronic system (PTS), code 220.

AR54.65-P-0007RT

13

Remove rear dome lamp

AR82.20-P-0113RT

14

Open cargo space floor

15

Pull paneling (2) toward inside

Installation: Ensure that guides (arrows A) are seated correctly.

16

Pull electrical connector (3) out of load compartment fuse and relay box (F4)

17

Remove rear wall door seal in working area

18

Unscrew nut from ground, right D-pillar (W29/9) and ground, headliner covering (W48/3)

19

Remove cable ties (4, 5)

Installation: Use new cable ties (4, 5).

20

Disconnect electrical connector (6, 7, 8, 9, 10)

Carefully disconnect electrical connector (6, 9) of ribbon cable, danger of breakage!

21

Guide connector (11) through opening (arrow B)

22

Disconnect electrical connector (12) and guide through opening (arrows B)

23

Remove bolts (13)

24

Unclip clips (14)

25

Unclip luggage holder covers (15) (arrow C)

Long wedge

*115589035900

26

Unclip headliner (1) at rear (arrows D)

27

Pull headliner (1) toward front (arrow E) until headliner (1) detaches from retaining rail (16)

Installation: Ensure that headliner (1) is seated correctly in retaining rail (16).

28

Unclip headliner (1) on retaining tabs (17) from mounting rails (18)

Support headliner (1) in rear area with aid of helper. Danger of breaking!

29

Remove headliner (1) from vehicle toward rear and lay down on clean subsurface.

With aid of helper.

30

Install in the reverse order

Remove/install headliner

Long wedge

115 589 03 59 00

Odkazované dokumenty