D68.10-1116-11
1 Instrument panel
| Remove/Install | ||
1.1 | Remove cover of radio installation slot | With code ER0, radio preinstallation. Unclip electric leads from cover | |
1.2 | Remove radio | with codes EF5, EF6, EF7, ET0 or ET8, radio | |
2 | Remove glove compartment | ||
3.1 | Remove stowage compartment below pen holder | except codes J19 or J28, tachograph | |
3.2 | Remove tachograph | with codes J19 or J28, tachograph | |
4 | Remove cover at instrument panel | ||
5 | Remove instrument cluster | ||
6.1 | Remove stowage compartment above glove compartment | Except code SA6, passenger airbag. | |
6.2 | Remove passenger airbag unit | With code SA6, passenger airbag. Disconnect ground cable of battery when working on the airbag. | |
7.1 | Remove cover for air nozzle on passenger side | With code SA6, passenger airbag. | |
8 | Remove paneling on A-pillars | Unclip top paneling and pull out upward | |
9 | Remove loudspeaker | ||
10 | Remove cover on center part of instrument panel | ||
11 | Unscrew air conditioning control and operating module | Plugs and cables remain connected and are guided through the installation opening when removing the instrument panel with control and operating module. | |
With code H25, automatic heater control, "Heatmatic" or code HH9, regulated air conditioning, "Tempmatic" | |||
Except code H25, automatic heater control, "Heatmatic" or code HH9, regulated air conditioning, "Tempmatic" | |||
12 | Remove drawer | ||
13 | Remove top part of instrument panel | Installation: Pay attention to radio cable routing. The cables should not rest above the air duct, otherwise they could get damaged. | |
14 | Unscrew electrical center | Multiplug and electrical lines remain connected. | |
15 | Remove air nozzles in instrument panel | Only right and left air nozzles. | |
16 | Remove instrument panel | ||
Installation: Install instrument panel. | |||
17 | Install in the reverse order | ||
18.1 | Set time at instrument cluster | except codes J19 or J28, tachograph | |
19.1 | Set time on timer for auxiliary heater | With code H12, hot water auxiliary heater or H86, timer for auxiliary heater. | |
20.1 | Enter radio code | with codes EF5, EF6, EF7, ET0 or ET8, radio. See Operating Instructions |