ar6230p2300rt

Remove/install front end crossmember

Typ ar · téma 62.30 · verze 0100 · 2005-08-18

Platí pro: MODEL 251

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 62 Přední část a čelní stěna › 62.30 Příčník a přední výztuha — Řada 251

EinPAS 35 Karoserie/rám/montované díly › 35.30 Příď vozidla › 35.30.35 Nosič/montáž kol — Řada 251

AR62.30-P-2300RT

Remove/install front end crossmember

8.6.05

MODEL 251

Remove/install front end crossmember

P62.30-2839-08

1 Radiator grille

3 Radiator crossmember

2 Intake air ducts

Remove/install front end crossmember

P62.30-2840-09

3 Radiator crossmember

4 Bolts

5 Bolts

6 Right engine hood catch

11 Spring bracket

12 Release cable

13 Nipple

7 Weatherstrip

8 Bolts

9 Bolt

10 Bolt

Remove/install front end crossmember

P62.30-2841-06

3 Radiator crossmember

12 Release cable

14 Bolts

15 Fanfare horns

16 Electrical connectors

Remove/install

Notes on self-locking bolts and nuts

All models

AH00.00-N-0001-01A

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood and raise to vertical position

After closing the engine hood, check whether it locks properly; for this purpose, pull engine hood upward with a jerk.

AR88.40-P-1000RT

2

Remove radiator grille (1)

AR88.40-P-4001RT

3

Remove intake air ducts (2)

4

Remove bolts (4).

*BA88.40-P-1003-01L

5

Loosen bolts (5).

*BA62.30-P-1001-03C

6

Pull weatherseal (7) in area of radiator crossmember (3) upwards

7

Unscrew bolts (8).

*BA62.30-P-1001-03C

8

Unscrew bolt (9)

*BA62.30-P-1001-03C

9

Remove bolt (10)

*BA62.30-P-1001-03C

10

Remove right engine hood lock (6) from front end until release cable (12) is accessible

11

Bend back spring bracket (11) and unhook nipple (13) from right engine hood lock (6).

12

Unhook release cable (12) from right engine hood lock (6) and remove right engine hood lock (6) upward

13

Remove bolts (14).

*BA62.30-P-1002-03C

14

Disconnect electrical connectors (16)

15

Remove radiator crossmember (3)

16.1

Remove fanfare horns (15)

When replacing radiator crossmember (3).

AR54.35-P-1555RT

17

Install in the reverse order

18

Check function of hood latch, if necessary adjust lock pawl

Check the lock and safety hooks of engine hood

AP88.40-P-8851RT

19.1

Attach danger warning to radiator crossmember (3)

When replacing radiator crossmember (3).

Radiator crossmember

Number

Designation

Model 251

BA62.30-P-1001-03C

Bolt, radiator crossmember to crossmember

Nm

10

BA62.30-P-1002-03C

Bolt, radiator crossmember to bumper carrier

Nm

10

Engine hood

Number

Designation

Model 251

BA88.40-P-1003-01L

Bolt, engine hood lock to radiator crossmember

Nm

10

Odkazované dokumenty