Remove/install radiator grille

AR88.40-P-4001RT

Remove/install radiator grille

20.4.10

14.4.10

Remove cover from radiator crossmember

Operation step 3



Removing

 Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000RT

2

Remove bolts (1)

3

Remove expansion rivets and cover from radiator crossmember

 As of model year 2011.

4

Release radiator grille (4)

 Push catch lugs (2) upward using a suitable tool.

5

Push lower area of radiator grille (4) toward rear and remove



Install

6

Install radiator grille (4) in front bumper (3)

 Press radiator grille (4) toward front.

 The catch lugs (2) should catch audibly in radiator grille (4).

7

Install bolts (1)

 Adjust gap between engine hood and radiator grille (4) and front bumper (3) and radiator grille (4) and tighten bolts (1).

 See:

Gap dimensions on hoods, doors and lids

AR60.00-P-0700-01RT

Gap between engine hood and front grille/bumper and front grille "Dimension E"

*BE60.00-P-1001-01S

 Feeler gauge

*129589032100

8

Close engine hood

AR88.40-P-1000RT

Number

Designation

Model 251

BE60.00-P-1001-01S

Gap dimension

Lamp unit to engine hood

Dimension "A"

mm

4 (1)

Lamp unit to fender

Dimension "B"

mm

4 (1)

Lamp unit to bumper

Dimension "C"

mm

4 (1)

Engine hood to bumper

Dimension "D"

mm

6 (1)

Engine hood to front grille/bumper to front grille

Dimension "E"

mm

7 (1)

See picture

-