ar6080w0120a

Remove/install cab locks

Typ ar · téma 60.80 · verze 0106 · 2012-02-23

Platí pro: MODEL 375.3 with BODY 375.810 MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 60 Nástavba všeobecně › 60.80 Kabina řidiče, uložení kabiny řidiče — Řada 375 (modely 3**, 810) · Řada 940 (modely 899) · Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**)

EinPAS 35 Karoserie/rám/montované díly › 35.50 Uložení kabiny řidiče/sklápěcí zařízení kabiny řidiče/vzduchové odpružení kabiny řidiče › 35.50.40 Uložení kabiny/sklápěcí zařízení kabiny — Řada 375 (modely 3**, 810) · Řada 940 (modely 899) · Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**)

AR60.80-W-0120A

Remove/install cab locks

16.2.12

MODEL 375.3 with BODY 375.810

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Remove/install cab locks

W60.80-1006-12

1 Cab lock

2 Hexagon bolt

3 Hydraulic connection

4 Tie strap

5 Connector

6 Retaining bracket

7 Hexagon nut

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

All models

AH54.10-P-0001-01A

Danger!

Risk of injury caused by being caught or pinched as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

2

Tilt cab

3

Disconnect cable strap (4) on lines to lock (1)

4

Disconnect hydraulic connector (3)

5

Disconnect electrical connector (5) to lock switch

6

Remove cab lock (1)

*BA60.80-N-1013-01B

7

Install in the reverse order

Cab mounting

Number

Designation

Body
375.810 /820
in model 375.3

Body
940.890/899 in model 950.5/6, 952.5/6, 953.6, 954.5

BA60.80-N-1013-01B

Nut, rear cab locks to retaining bracket

Nm

100

100

Odkazované dokumenty