Checking and adjusting cab air suspension · ar6080w0110a · Mercedes-Benz WIS

AR60.80-W-0110A

Checking and adjusting cab air suspension

15.11.95

MODEL 950, 952, 953, 954 with CODE (FL2) Air-sprung comfort cab suspension

W60.80-0003-06

1 Front air suspension bellows

2 Front control rod
3 Front air suspension valves
4 Rear air suspension bellows
5 Rear control rod
6 Rear air suspension valve

A Distance between upper and lower pneumatic bellows mount

	Checking, adjusting
1	Pressurize compressed air system up to switch-off pressure
2	Open front flap
3	Measure distance between upper and lower pneumatic bellows mount on left and right front pneumatic bellows (1)	 If the dimension "A" is not achieved, loosen counter nuts on control rods (2) on left and right and turn control rods until dimension (A) is reached. Tighten counter nuts. Shorten control rods - to lower cab Lengthen control rods - to raise cab	*BE60.80-N-1001-01A
4	Measure distance between upper and lower pneumatic bellows mount on rear pneumatic bellows (4)	 If the dimension (A) is not reached, loosen counter nut on control rod (5) on left and turn until dimension (A) is reached. Tighten counter nuts. Shorten control rods - to lower cab Lengthen control rods - to raise cab	*BE60.80-N-1001-01A
5	Close front flap

Test and adjustment values for cab air suspension

Number	Destination		Model 950	Model 952	Model 953	Model 954


BE60.80-N-1001-01A	Distance from bottom to top air suspension bellows mount	mm	295	295	295	295