Workshop equipment
WE58.40-Z-1008-01B | Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter) |
WE58.40-Z-1009-01B | Body lifting jack |
D60.10-0022-11
The installation description applies in the same way for the left and right sides for rear end repairs.
The part numbers of the brackets are cast on the side. The brackets are screwed with hexagon screws (1) and captive nuts (2) of the modular members.
D60.10-0023-11
The part numbers and arrows can be found at the straightening tools. The arrow must be pointing in direction of travel, if correctly installed. The straightening tools for the left-hand side of the vehicle are also stamped with an "L" next to the arrow.
D60.10-0035-02
D60.10-0029-02
14 Intermediate plate 7001.7014 (for mounts 16 and 17 for MZ.200)
15 Intermediate plate 7001.7015 (for mounts 16 and 17 for MZ.200)
16 Mount for rear engine mount base 7001.7016 (for MZ.200)
17 Mount for rear engine mount base 7001.7017 (for MZ.200)
26 Base carrier for rear spring, front spring bearing bracket 7001.7026 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)
27 Base carrier for rear spring, front spring bearing bracket 7001.7027 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)
28 Mounts 7001.7028 (for base carriers 26 and 27)
33 Distance sleeve 7001.7033 (for mount 28)
34 Reducer sleeves to wrench size
18 mm 7001.7034 (for mounts 28, for all 2.5-3.5 t)
MZ.200 Support
D60.10-0037-02
D60.10-0134-02
31 Mount for rear spring, rear spring bearing bracket 7001.7031 (for MZ. 141/MZ142, for all 2.5-3.5 t)
32 Mount for rear spring, rear spring bearing bracket 7001.7032 (for MZ.141/MZ142, for all 2.5-3.5 t)
35 Intermediate plate for rear end support 7001.7035
36 Intermediate plate for rear end support 7001.7036
37 Mount for rear longitudinal member 7001.7037 (for MZ.260)
38 Angle bracket 7001.7038 (for mount 37)
39 Angle bracket 7001.7039 (for mount 37)
MZ.141 Support
MZ.142 Support
MZ.260 Support
D60.10-0132-02
D60.10-0034-02
20 Mount for rear spring, front spring bearing bracket 7001.7020 (for MZ.260, with spring installed and removed, for platform/crewcab 2.5-3.5 t only)
21 Mount for rear spring, front spring bearing bracket 7001.7021 (for MZ.260, with spring installed and removed, for platform/crewcab 2.5-3.5 t only)
22 Spacer sleeve 7001.7022 (for mount 20 and 21, with spring bracket removed)
23 Spacer plate 7001.7023 (for mount 20 and 21, with spring bracket removed)
24 Intermediate plate 7001.7024 (for mounts 20 and 21, for MZ.260, platform vehicle/crewcab with wheelbase
4025 mm only)
25 Intermediate plate 7001.7025 (for mounts 20 and 21, for MZ.260, platform/crewcab with wheel base
4025 mm only)
40 Mount 7001.7040 (for front longitudinal member base, at rear engine support)
41 Mount 7001.7041 (for front longitudinal member base, at rear engine support)
T.034 Centering pin (for mounts 40 and 41)
MZ.260 Support
D60.10-0133-02
29 Mount for rear spring, rear spring bearing bracket 7001.7029
(for MZ.260, for all 4.6 t)
30 Mount for rear spring, rear spring bearing bracket 7001.7030
(for MZ.260, for all 4.6 t)
MZ.260 Support