ar6010d501002a

Set up straightening bracket set for front end repairs

Typ ar · téma 60.10 · verze 0109 · 2006-07-25

Platí pro: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 MODEL 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 60 Nástavba všeobecně › 60.10 Rovnací stolice, rovnací sada — Řada 690 (modely 6**) · Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

EinPAS 35 Karoserie/rám/montované díly › 35.15 Měření/rovnací stolice › 35.15.30 Rovnací stolice — Řada 690 (modely 6**) · Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

AR60.10-D-5010-02A

Set up straightening bracket set for front end repairs

Notes on aligning and welding work on shock absorber strut mount

Models 903, 904 on all-wheel drive vehicles

AH60.00-N-0020-01A

Workshop equipment

WE58.40-Z-1008-01B

Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter)

WE58.40-Z-1009-01B

Body lifting jack

WE58.40-Z-1012-01B

Extended straightening bracket set 7001.309 for all-wheel Sprinter for straightening bracket set 7001.300

Set up straightening bracket set for front end repairs

D60.10-0022-11

The installation description applies in the same way for the left and right sides for front end repairs.

The part numbers of the supports are cast on the side.

1 Attach supports with hex. head bolts (1) and nuts (2) present in modular members.

Set up straightening bracket set for front end repairs

D60.10-0023-11

The part numbers and arrows are indicated on the straightening angles. When set up correctly, the arrows point in the direction of motion. The straightening tools for the left-hand side of the vehicle are also stamped with an "L" next to the arrow.

Set up straightening bracket set for front end repairs
Set up straightening bracket set for front end repairs

D60.10-0025-02

D60.10-0024-02

1 Mount for front crossmember 7001.7001 (for MZ.260)

2 Mount for front cross member 7001.7002 (for MZ.260)

3 Basic carrier 7001.7003 (for mounts 5 and 6 and centering pin V.29)

4 Base carrier 7001.7004 (for support 5 and 6 and centering pin V.29)

5 Mount for securing floor panel 7001.7005 (for base carrier 3 and 4)

6 Mount for floor sheet attachment 7001.7006 (for basic carriers 3 and 4)

V.29 Centering punch for front longitudinal member support (for basic carriers 3 and 4)

MZ.260 Support

Set up straightening bracket set for front end repairs
Set up straightening bracket set for front end repairs

D60.10-0027-02

D60.10-0026-02

7 Mount for front axle attachment to front longitudinal member 7001.7007 (for MZ.260)

8 Mount for front axle attachment to front longitudinal member 7001.7008 (for MZ.260)

9 Mount for spring strut console 7001.7009 (for MZ.260) except all-wheel drive

7001.7043 (for MZ.260) all-wheel drive only

10 Mount for spring strut console 7001.7010 (for MZ.260) except all-wheel drive

7001.7044 (for MZ.260) only all-wheel drive

11 Checking and locating plate 7001.7011 for supports 9 and 10)

T.039 Centering punch (for mounts 7 and 8)

MZ.260 Support

Set up straightening bracket set for front end repairs
Set up straightening bracket set for front end repairs

D60.10-0029-02

D60.10-0028-02

12 Mount for front axle attachment to rear longitudinal member 7001.7012 (for MZ.260)

13 Mount for front axle attachment to rear longitudinal member 7001.7013 (for MZ.260)

14 Intermediate plate 7001.7014 for mounts 16 and 17 for MZ.200)

15 Intermediate plate 7001.7015 (for mounts 16 and 17 for MZ.200)

16 Mount for rear engine mount support 7001.7016 (for MZ.200)

17 Mount for rear engine mount base 7001.7017 (for MZ.200)

MZ.200 Support

MZ.260 Support

Set up straightening bracket set for front end repairs
Set up straightening bracket set for front end repairs

D60.10-0031-02

D60.10-0030-02

18 Mount for front propeller shaft bearing console 7001.7018 (for MZ.260)

19 Mount for rear propeller shaft bearing bracket 7001.7019 (for MZ.260)

MZ.200 support

MZ.260 Support

Adapter (19) with support MZ.200 set up only with :

Vehicles with wheelbase of 3550 mm and gasoline engine (M111),

Vehicles with wheelbase 4025 mm.

Set up straightening bracket set for front end repairs
Set up straightening bracket set for front end repairs

D60.10-0033-02

D60.10-0032-02

20 Mount for rear spring, front spring bearing bracket 7001.7020 (for MZ.260, with spring installed and removed, only for platform vehicle/crewcab 2.5-3.5 t)

21 Mount for rear spring, front spring bearing bracket 7001.7021 (for MZ.260, with spring installed and removed, only for platform vehicle/crewcab 2.5-3.5 t)

26 Base carrier for rear spring, front spring bearing bracket 7001.7026 (with spring installed and removed, all 2.5-4.6 t except platform vehicle/crewcab 2.5-3.5 t)

27 Base carrier for rear spring, front spring bearing bracket 7001.7027 (with spring installed and removed, all 2.5-4.6 t except platform vehicle/crewcab 2.5-3.5 t)

28 Mounts 7001.7028 (for basic carriers 26 and 27)

34 Reducer sleeves to wrench size
18 mm 7001.7034 (for mounts 28, for all 2.5-3.5 t)

MZ.260 Support

Set up straightening bracket set for front end repairs

D60.10-0034-02

40 Mount 7001.7040 (for front longitudinal member base, at rear engine support)

41 Mount 7001.7041 (for front longitudinal member base, at rear engine support)

T.034 Centering punch (for mounts 40 and 41)

Odkazované dokumenty