ar5418t0002aa

Disconnecting and connecting electrical cables from battery

Typ ar · téma 54.18 · verze 0102 · 2012-02-23

Platí pro: MODEL 671.015 /020 /021 /030 /042 /332 /333

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 54 Elektrické zařízení, výstroj a přístroje › 54.18 Kabelové svazky — Řada 671 (modely 015, 020, 021, 030, 042, 332, 333)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.20 Elektrická síť vozidla › 25.20.12 Snímač/spínač/kabelový svazek — Řada 671 (modely 015, 020, 021, 030, 042, 332, 333)

AR54.18-T-0002AA

Disconnecting and connecting electrical cables from battery

16.2.12

MODEL 671.015 /020 /021 /030 /042 /332 /333

Disconnecting and connecting electrical cables from battery

T54.18-0033-01

1 Battery tray lock

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Disconnecting

1

Switch off ignition

2

Open left maintenance flap behind the front axle

3

Turn manual vehicle power supply switch to "0"

4

Remove battery tray lock (1) and pull out batteries with battery tray

5

Disconnect battery terminals

Ensure that no accidental contact can occur between the battery terminals.

Battery notes

All models

AH54.10-P-0001-01A

Inspect

6

Check all electrical contacts for damage

Replace parts or batteries if necessary.

Connecting

7

Connect battery terminals

8

Push in batteries with battery tray and lock

9

Turn manual vehicle power supply switch to "1"

10

Set tachograph, clock and radio

See Operating Instructions

Odkazované dokumenty