ar5410g0003c

Disconnect/connect battery ground line

Typ ar · téma 54.10 · verze 0107 · 2018-06-27

Platí pro: Model 437.420/421/425/426/430/431/435/436 Vehicles for civilian use

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 54 Elektrické zařízení, výstroj a přístroje › 54.10 Akumulátor, zdroj napětí, měnič napětí — Řada 437 (modely 420, 421, 425, 426, 430, 431, 435, 436)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.20 Elektrická síť vozidla › 25.20.12 Snímač/spínač/kabelový svazek — Řada 437 (modely 420, 421, 425, 426, 430, 431, 435, 436)

AR54.10-G-0003C

Disconnect/connect battery ground line

21.06.2018

Model

437.420/421/425/426/430/431/435/436

Vehicles for civilian use

Disconnect/connect battery ground line
Disconnect/connect battery ground line

Shown without code E22 (Pull-out battery box tray)

1

Quick-release coupling

2

Battery box cover

3

Ground cable

4

Battery

G54.10-3177-01

G54.10-3181-01

Disconnect/connect battery ground line

G54.10-3185-07

Shown with code E22 (Pull-out battery box tray)

2

Battery box cover

5

Lock

3

Ground cable

6

Lock

4

Battery

7

Battery box tray

Danger

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Disconnect, connect

1

Switch off all electrical consumers.

2

Remove key from steering lock.

3.1

Remove battery box cover (2).

Except code E22 (Pull-out battery box tray)

To do so, open quick-release coupling (1).

3.2

Fold down battery box cover (2).

With code E22 (Pull-out battery box tray)

To do so, release both locks (5) using a square socket wrench.

4

Pull out battery box tray (7) with batteries (4).

With code E22 (Pull-out battery box tray)

To do so, release the lock (6) using a square socket wrench.

5

Disconnect ground line (3) from battery (4).

6

Connect in reverse order.

7

Set time.

Only if the time is not updated automatically.

See operator's manual.

Odkazované dokumenty